Druck LiquidTC 255 Liquid Bath Temperature Calibrator
The Druck LiquidTC 255 combines the portability of a dry block calibrator with the flexibility of a liquid immersion bath to enable the testing and calibration of virtually any shape and size of devices.
The calibrators are factory configured as liquid baths and are provided with a bath cover to hold up to 5 devices while reducing heat loss from the surface of the liquid medium.
For transportation a leak-proof sealing cover is also provided as standard. Optionally the temperature calibrators can be configured with additional capabilities including interchangeable liquid baths, a black body source and dry block interchangeable inserts.
Druck LiquidTC 255 Specifications
| Temperature Range | Ambient to 255°C (Ambient to 490 °F option). |
|
| Heat Well | Dia 60 mm/depth 170 mm (150 mm working depth). | |
| Measuring Zone | 0 to 40 mm from the bottom of the insert. | |
| Stability | 0.05°C. | |
| Accuracy | ||
| Standard Liquid Bath – LI | 0.2°C. | |
| Dry Block Option – DB | 0.4°C. | |
| Infrared Black Body Option – IR | 0.5°C. | |
| Black Body Emissivity | 0.9994. | |
| Display | ||
| Display Range | 0 to 255°C. | |
| Measurement Resolution | 0.01° from -9.99 to 99.99 otherwise 0.1°C. | |
| Setting Resolution | 0.1°C. | |
| Standard Features | ||
| Functions | Controller off, manual control, operating service hours, set-point memory, rate control °C/min, test profile. | |
| Power Requirements | ||
| Supply Voltage | 100 to 240 V AC 50/60 Hz. | |
| Power Consumption | 1000 VA nominal. | |
| Dimensions/Weight | ||
| Width | 150 mm. | |
| Height | 330 + 68 mm. | |
| Depth | 270 mm. | |
| Weight | 7.5 kg. | |
| Environmental | ||
| Ambient Temperature | 10°C to 50°C (50°F to 122°F) Specifications valid at 18 °C to 28 °C (65 °F to 82 °F) ambient temperature. Minimum and maximum temperatures may not be achieved over the full ambient temperature range. |
|
| Ambient Humidity | To 80% RH (non-condensing). | |
| Storage Temperature | From -10 to 60°C (14 to 140°F). | |
| Recommended Operating Environment | Indoor use. Not for use in potentially explosive atmospheres. | |
| Compliance | EN6326 (EMC), EN61010 Oelectrical safety), EU directive (RoHS, REACH, WEEE). | |
| Druck LiquidTC 255 warranty | One-year. | |
